学会発表 |
- 2023年
- "Revolutionizing Plastic Recycling: Unveiling Insights through Dynamic Molecular Simulations", M. Althaf Hussain, T. Yamamoto, S. Yao, 2023 年度高分子基礎物性研究会・高分子計算機科学研究会 合同討論会, 2023年12月22日
- "Enhancing Plastic Recycling Approaches: Insights from Non-Equilibrium Molecular Dynamics Simulations", M. Althaf Hussain, T. Yamamoto, S. Yao, PPS2023, 2023年12月01日
- "Introduction of Japanese NEDO project and Revolutionary Mechanical Recycle Process", S. Yao, Patchiya Phantong, Nobuhisa Takayama, PPS2023, 2023年11月30日
- "Understanding Rheological Studies of Plastics in Mechanical Recycling Process: A Combined MD and NEMD Simulations Study", M. Althaf Hussain, T. Yamamoto, S. Yao, ISFR2023, 2023年11月07日
- "Effect of Novel Extrusion Process on Mechanical Properties of Low-Density Polyethylene in Different Grades", P. Phanthong, S. Yao, ISFR2023, 2023年11月07日
- "Advanced Plastic Circulation System Constructed from Basic Polymer Physics", Shigeru YAO, Patchiya Phanthong, Mohammed Althaf Hussain, Nobuhisa Takayama, Hideaki Obuchi, Yuki Yamashita, ISFR2023, 2023年11月07日
- "Effects of the Optional Equipment for Twin-Screw Extruder with Molten Resin Reservoir on the Mechanical Properties of Recycled Plastics", Y. Yamashita, N. Takayama, T. Ryumoto, S. Yao, ISFR2023, 2023年11月06日
- "Analyzing the Relationship between Mechanical Properties and Inner Structure of Compounded Polyethylene Virgin Film with Different Extrusion Condition", M. Toshimitsu, S. Yao, Y. Matsukuma, ISFR2023, 2023年11月06日
- "Recent Progress on the Revolutionary Mechanical Recycle and Environmentally Friendly Molding based on Physical Degradation / Physical Regeneration Theory", Yao Shigeru, Polymers2023 (Invited Speaker), 2023年11月01日
- 「改良型ブレーカープレートを設置した樹脂溜り内のポリプロピレンの流動」, 野崎楓哉, 内山弘規, 中山晧太, 西山純平, 劉本恭大, 小渕秀明, 松隈洋介, 八尾滋, 成形加工学会 環境・リサイクル専門委員会主催シンポジウム, 2023年10月30日
- 「CFD による樹脂溜り内のABS の流動解析」, 中山晧太, 内山弘規, 野崎楓哉, 劉本恭大, 西山純平, 小渕秀明, 松隈洋介, 八尾滋, 成形加工学会 環境・リサイクル専門委員会主催シンポジウム, 2023年10月30日
- "Estimating the Impact of Melt Relaxation on HDPE's Entanglements and Recrystallization Using Molecular Dynamics Simulations", M. Althaf Hussain, T. Yamamoto, S. Yao, 成形加工学会 環境・リサイクル専門委員会主催シンポジウム, 2023年10月30日
- "Dynamic Shear Treatment: Towards the Development of Plastic Mechanical Recycling Process", Patchiya Phanthong, Shigeru Yao, 成形加工学会 環境・リサイクル専門委員会主催シンポジウム, 2023年10月30日
- 「物理劣化・物理再生理論が拡張するプラスチックの資源循環」, 八尾滋, 成形加工学会 環境・リサイクル専門委員会主催シンポジウム, 2023年10月30日
- 「高分子物性から考える環境配慮設計」,八尾 滋, パントン パチヤ, 高山暢久, 第72回高分子討論会, 2023年09月28日
- 「低密度ポリエチレンフィルムのメカニカルリサイクルにせん断処理モードが及ぼす影響」,パントン パチヤ ・八尾 滋, 第72回高分子討論会, 2023年09月28日
- "Shear Deformation Mode Dependence of Mechanical Properties of Various LDPEs", パントン パチヤ・八尾 滋, 第10回高分子学会グリーンケミストリー研究会シンポジウム,第24回プラスチックリサイクル化学研究会研究討論会 合同研究発表会, 2023年08月10日
- 「プラスチックのリサイクル特性から考える資源循環促進法」, 八尾 滋, 第32回日本エネルギー学会大会 (特別講演), 2023年08月08日
- "Revolutionary Mechanical Recycling Process based on the Physical Degradation and Physical Regeneration theory", Yao Shigeru, IPC2023 (Invited Lecture), 2023年07月20日
- "Upgrade Mechanical Recycling Process based on the Physical Degradation and Regeneration Theory", Yao Shigeru, EUROMSN2023, 2023年06月29日
- "Molding pressure dependence on physical properties and lamellar structure of mechanical recycled polyethylene reprocessed by dynamic shear treatment", Phanthong Patchiya, Yao Shigeru, プラスチック成形加工学会年次大会, 2023年06月22日
- "Form and mechanical behavior of semicrystalline high-density polyethylene (HDPE) under static and large amplitude oscillatory shear deformation: a molecular dynamics (MD) simulation study", Hussain Mohammed Althaf, Yamamoto Takashi, Yao Shigeru, プラスチック成形加工学会年次大会, 2023年06月22日
- 「福岡大学でのプラスチック回収と樹脂種割合解析」, 橋本さらら, 伊藤美怜, 荒谷成美, 倉持彰儀, 柴田大地, 山下莉緒, 立元友梨佳, 鈴木慎也, 大村拓輝, 八尾 滋, プラスチック成形加工学会年次大会, 2023年06月21日
- 「リサイクル無定形プラスチック材料の力学物性の 成形履歴依存性ー ABSの場合ー」, 八尾 滋, 中山 皓太, パントン パチヤ, 高山 暢久, プラスチック成形加工学会年次大会, 2023年06月21日
- "Effect of molding pressure on lamellar structures and mechanical properties of mechanical recycled low-density polyethylene", Phanthong Patchiya, Yao Shigeru, PPS, 5月26日
- "Modeling Large Amplitude Oscillatory Shear Deformation in Semi-crystalline High-Density Polyethylene", Hussain Mohammed Althaf, Yamamoto Takashi, Yao Shigeru, PPS, 5月25日
|